Skip to content
Konferans Salonu Koltukları

Service

Conference Chair Spare Parts

Conference chair spare parts are the most practical way to bring a hall back into use without replacing whole seats. We identify the right mechanism, armrest, cover, foam, writing tablet or fixing with you from measurements and photos.

Conference Chair Spare Parts

Which Conference Chair Spare Parts Are Available?

Conference chair spare parts include frame and leg components, folding mechanisms and springs, armrests and armrest covers, back and seat covers, foam and fabric, writing tablets, and screws and fixings. Because these parts can be supplied individually, most faults can be fixed without replacing the entire seat or touching the rest of the row.

Part groupExample partsTypical problem
SupportLeg, body tube, bracket, floor anchorLoosening, wobbling
MechanismFolding mechanism, spring, pin, bushingSeat does not return, noisy
ArmArmrest, armrest cover, cup holderCracked, broken, loose
CoversBack shell, seat underside coverBreakage, faded colour
UpholsteryFoam, fabric coverCollapse, tearing
TabletWriting tablet, hinge, folding bracketLoose, broken hinge
FixingsScrews, nuts, washersWorn threads, play

How Do You Identify the Right Spare Part?

The key to finding the right spare part is not knowing the brand but identifying the dimensions and connection type correctly. On seats that look identical, the distance between mounting holes can differ by a few millimetres. That is why the model, mounting point spacing and screw diameter should all be checked before an order is placed.

For accurate matching, simply share:

  1. A general photo of the seat and the model name if known
  2. Close-ups of the faulty part from several angles
  3. Measurements of the part and its mounting points
  4. The quantity you need

If the manufacturer is unknown, a photo of the old part with a tape measure, or ideally the sample part itself, confirms the match.

Why Are Mechanisms and Springs Replaced So Often?

On folding seats, the mechanism and spring work every time someone sits down or stands up. Repeated movement tires the spring, wears pins and bushings and widens screw holes. Eventually the seat no longer returns, stops halfway or makes noise. Replacing these parts in time protects the frame and the other parts from further damage.

Wear is usually felt first as slight play, and then the seat starts to wobble. In halls with many folding seats, keeping a few spare mechanisms and springs allows a quick fix when a fault appears.

How Should Armrest, Cover and Tablet Parts Be Chosen?

Armrests, back and seat covers and writing tablets are the visible face of the seat, so they must match in both size and appearance. The mounting points must line up exactly with the existing seat, and colour and shape should match the rest of the hall. Impact-resistant material extends the life of parts that are touched constantly.

  • Armrests and covers: similar-looking parts can differ at the mounting points, so dimensions must be confirmed.
  • Writing tablet: the hinge and folding bracket should be checked together with the tablet.
  • Cup holder: on arm-integrated cup holders the fixing method varies by model.

How Should Replacement Foam and Fabric Be Chosen?

Foam and fabric directly determine seating comfort. When foam collapses, only the foam block needs replacing, and the new density should be chosen according to how often the hall is used. For fabric, abrasion resistance, easy cleaning and colour match are what count. Ordering without measuring the mould is the most common mistake people make.

If you would rather have foam and fabric replaced for you, see our conference chair repair service.

What Are the Common Mistakes When Sourcing Spare Parts?

The two most common mistakes are ordering from a photo alone and choosing cheap, low-quality parts to save money. Similar-looking parts may not fit at the mounting points, and thin plastics or low-density foam soon repeat the same fault. Both mistakes mean ordering the same part twice and losing time.

For bulk orders, check that all seats in the hall are the same model and, if in doubt, measure several seats and start with a small trial order.

Who Should Fit the Spare Parts?

Simple parts such as covers, armrest caps and screws can be changed with basic hand tools. Mechanisms, springs, foam and upholstery need proper assembly know-how. A wrongly fitted mechanism can shorten the life of the seat and put users at risk, so these jobs are best left to an experienced team that knows the seat type.

How Do You Get a Quote for Spare Parts?

To get a quote, share photos of the parts, their measurements and the quantity you need. Once the parts are matched from your photos and measurements, the supply option and price are confirmed. Parts are prepared on request, and the delivery plan is stated in the quote according to the part type and order quantity.

Send your request through the quote form or share photos via WhatsApp. If you are considering new seats, browse our conference chairs category.

Frequently asked questions

In most cases, yes. Matching is done from a measured photo of the part and the dimensions of its mounting points; sending a sample part confirms the fit.

Our product categories

Conference, theater and seminar seating

All products

Get a quote

Get a free quote for your hall

Send us the number of seats, the condition of the hall or your request with photos on WhatsApp, or fill in the quote form, and we will prepare a tailored price.